Apple AirPort
v5.3.2 |
1. Launch the AirPort
Utility in Applications > Utilities.
2. Select the AirPort
you would like to edit, then click the Manual Setup button.
3. Enter your AirPort password.
If your password is saved to your "keychain,"
you will not need to enter a password.
4. Select the Internet
Connection tab.
5. Type in Mailshell addresses
in DNS servers fields, then click Update button.
Before proceeding, please write down your current
DNS settings, so you may revert to your original settings
at any time.
Preferred DNS server address for Mailshell is:
209.157.66.245
Alternate DNS server address for Mailshell is:
74.208.45.33
Note: If the Airport is having issues distribution
the new DNS information to other computers on your network,
you may need to go here
to update the firmware.
|